相参频率捷变雷达目标稀疏重建性能边界综述

相比频率固定的脉冲多普勒体制, 频率捷变体制在抗干扰方面具有显著优势。但在该体制下, 基于匹配滤波的信号处理算法存在旁瓣平台问题, 难以与动目标检测兼容。压缩感知理论将目标参数估计建模作为欠定方程求解, 为该问题提供了解决思路。在相参频率捷变雷达中, 压缩感知能否准确重建目标是一个基础性问题。本文梳理了针对该问题的相关研究, 借助相变理论与相变曲线的解析表达式, 定量描述了捷变频雷达重建目标的成功概率与主要系统和目标参数之间的关系; 该理论性能边界与仿真实际所能达到的性能相接近。此外, 还探讨了现有成果在实际应用中的价值, 展望了未来研究方向。     

Zr-xNb-4Sn alloys with low Young’s modulus and magnetic susceptibility for biomedical implants

The microstructure, mechanical and magnetic properties of Zr–x (8, 9, 10, wt.%)Nb–4Sn alloys were investigated to obtain novel Zr-based alloy with low Young’s modulus and magnetic susceptibility for biomedical implants. After homogenization annealing, hot forging and solution annealing, Zr–8Nb–4Sn, Zr–9Nb–4Sn and Zr–10Nb–4Sn alloys were composed of β+α″ phase, β+α″ phase, β+ω phase, respectively. The temperature at which the α" and ω phase were transformed into β phase during the heating process was about 200 ​°C, and the phase transformation temperature decreased with the increase of Nb element. Among all the Zr–x (x ​= ​8,9,10)Nb–4Sn(wt.%) alloys, Zr–9Nb–4Sn alloy had the lowest Young's modulus of 46.6 ​GPa and the low magnetic susceptibility of 1.294 ​× ​10⁻⁶ cm³g⁻¹, which has a good application prospect for biomedical applications.     

隧道爆破力学模型相似材料配比的正交试验

以砂岩作为模拟对象,研究满足隧道爆破力学模型试验要求的相似材料配比问题.基于正交试验法,选取石英砂、重晶石粉、石膏、水泥和水为相似材料,设置以石英砂/固体、水泥/石膏、重晶石粉/(重晶石粉+石英砂)的质量比为3个因素,每个因素3个水平,共9组配比的正交试验方案.通过室内试验,得到相似材料的密度、单轴抗压强度、弹性模量和声波波速的实测数据.试验结果表明:相似材料的物理力学参数分布范围较广,可满足不同隧道模型试验对相似材料的配比要求.利用极差敏感分析法分析各因素对相似材料参数的敏感性,并通过各因素对相似材料参数影响的直观分析图,分析各因素对相似材料物理力学参数的影响规律.对试验数据进行多元线性回归分析和室内试验,发现最优配合比下的相似材料与原型砂岩的单轴应力-应变曲线具有相似的脆性破坏特征;相似材料物理力学参数的设计值和实测值误差较小.     

大尺寸工程模型试验中的相似材料配比试验研究

大型物理模型试验是研究复杂工程问题的重要方法，如何快速、准确地确定相似材料配比是试验中至关重要的一环.为降低试验成本、简化试验步骤、充分调用原料性能，采用河砂、水泥和石膏这三种最普通的原料，以骨胶比(河砂与水泥石膏的质量比)和水膏比(水泥与石膏的质量比)为变量，进行了45组对比试验，对相似材料的物理及动、静力学参数进行了研究.获得了以河砂、水泥和石膏为原料配制的相似材料各物理量的变化区间；探讨了骨胶比和水膏比对相似材料各物理量的控制作用，并对比了其敏感性；基于多元线性回归分析建立了各因素与物理量间的定量关系，得到的拟合公式能较好地描述相似材料的性质.     

X105区块微幅度构造识别方法及应用

微幅度构造是油田开发中注水未波及的剩余油富集区。X105区块井间存在井网难以控制的微幅度构造，由于规模小，地震识别难。为提高识别精度，从3个方面开展了技术对策研究，以提高基础数据的准确性：开展提高微幅度构造成像精度的地震振幅高保真处理；创新了相位体约束层位解释方法提高砂岩组顶面识别精度；利用厚砂体井震匹配矛盾、"深浅"井震匹配矛盾分析法对微幅度构造进行筛选，去伪存真。应用上述方法，砂岩组顶面识别出断层控制和非断层控制两种成因类型的微幅度构造。在微幅度构造发育部位优选出未波及型和完善注采关系型两类剩余油挖潜区域，部署补充井实现了剩余油有效动用。     

Regulating microstructures and mechanical properties of Al-Fe-Ni alloys

Mechanical properties of Al-Fe-Ni eutectic alloys have been investigated based on the nominal mass fraction of eutectic phase,and the added Fe/Ni mass ratio.The X-Ray diffraction,scanning electron microscopy equipped with energy dispersive spectroscopy and transmission electron microscope have been used to identify phase composition,characterize microstructure and crystal structure of Al_9FeNi phase,respectively.The results demonstrate that the nominal mass fraction of eutectic phase control the presence of primary phase.The tensile strength slightly increases,and the ductility deteriorates sharply as the volume fraction of primary phase increases.The Fe/Ni mass ratio has the profound effect on the microstructures(i.e.,size and shape) of primary phase.When the Fe/Ni ratio is approaching to 1,the primary phase becomes rod-like shape,which can enhance the ductility of alloys over the flake-like phase.The increasing cooling rate can effectively reduce the eutectic grains size and primary phase fraction,and further significantly improve mechanical properties of the alloys.     

Recent advances and challenges in materials for 3D bioprinting

3D bioprinting has been developed as a promising technology in a wide variety of biomedical applications. However, the successful implementation of bioprinting is still heavily restricted by the relatively narrow range of printable and biocompatible materials. Recently, many comprehensive reviews of the main bioprinting methods, commonly used bioprinting materials and the trending bioprinting applications have been carried out. In this review, we focused on the trends in the development of materials for 3D bioprinting. The significance and recent advances of ECM-based materials, multi-material and stimuli-responsive materials for bioprinting were summarized successively. Moreover, the challenges in current studies and future perspectives of materials for 3D bioprinting were discussed.     

金属间化合物(Mg,Zn)_(12)Ce与(Mg,Zn)_(11)Ce的研究

对300℃时Mg-Zn-Ce系富镁侧化合物的成分特征、结构和相平衡关系进行了研究.结果表明,Mg-Zn-Ce富镁角存在一个Mg12Ce的二元置换固溶体(Mg,Zn)12Ce,还存在一个三元线性化合物(Mg,Zn)11Ce(τ相).(Mg,Zn)12Ce中Zn的范围为0~7.3%(原子分数),其晶体结构为体心四方晶格.三元线性化合物τ相含Zn为8.5%~43.5%(原子分数),其晶体结构为C底心正交晶格.(Mg,Zn)12Ce和τ相均与α(Mg)存在稳定的两相平衡,且在Mg-Zn-Ce系富镁角还存在三相平衡Mg+(Mg,Zn)12Ce+τ.     

基于相参积累的捷变频雷达系统相位误差估计与稀疏场景重构算法

针对系统相位误差导致的捷变频雷达目标回波信号相参积累性能下降问题, 构建了系统相位误差下捷变频雷达目标回波信号相参积累模型, 并基于目标的距离-速度二维稀疏性建立了最小ℓ₁范数优化模型, 提出一种基于交替方向乘子法的系统相位误差估计与目标场景稀疏重构联合处理算法, 实现了系统相位误差和目标参数的精确估计。仿真结果表明, 在信噪比为20 dB的情况下, 该方法能够精确估计系统相位误差, 其估计误差在2°以内。同时，相比于逆合成孔径雷达相位自聚焦算法, 所提算法重构性能和计算效率均得到改善, 目标重构幅度均方差提高了10 dB, 运算时间减少到1/2。     

基于PCA和相位差校正法的风切变预警算法

为了提高相干激光雷达风切变预警算法的预警率，提出一种基于主成分分析（principal component analysis，PCA）和相位差校正法的风切变预警算法。首先，利用PCA对雷达回波信号进行低阶主成分向量提取以实现信号重构，提高信噪比。其次，采用基于快速傅里叶变换的相位差校正法对回波信号峰值频率进行校正，降低回波信号能量泄露。然后，分别利用旋转电机实验数据和小型飞机实验数据对所提算法进行性能评估。结果表明，采用所提算法估计相干激光雷达回波信号峰值频率的平均绝对误差为0.26 MHz，对实际低空风切变的预警率为92.31%。所提算法可以有效降低相干激光雷达回波信号频率估计误差，实现低空风切变预警。